List of products by brand HYBRID RACING

Hybrid Racing MAXIM Shift Bott Collar - Stainless Steel

Hybrid Racing MAXIM Shift Bott Collar - Titanium

• Replace rubber bushing with 6061 Aluminum.
• Black Anodized and Laser Etched Finish.
• Chrome-Plated Steel Spherical Bearing.
• Installs in less than 30min.

• Set of two cable bushings
• Injection molded Delrin outer case
• Machined & anodized aluminum center bushing
• Corrosion resistant 
• Included high temp grease
• Easy to install & extremely durable
• Offers smooth shifts & reduces unwanted slack

• Replaces OEM Shifter Cables
• Solid rod ends and spherical bearings (not rubber like OEM cables)
• Machined & Anodized Billet end links
• Stainless steel core and core guides
• High heat, wire reinforced sleeve
• Permanently lubricated core

• Replacement OEM EP3 shifter cables
• Solid rod ends and spherical bearings (not rubber like OEM cables)
• Billet aluminum bushings
• Stainless steel cables and cable guides
• High heat, wire reinforced sleeve
• This is for a set of 2 cables

• Replaces OEM Shifter Cables
• Solid rod ends and spherical bearings (not rubber like OEM cables)
• Machined & Anodized Billet end links
• Stainless steel core and core guides
• High heat, wire reinforced sleeve
• Permanently lubricated core
• Designed specifically for the FK8 Civic Type R

• Replacement OEM DC5/RSX & K-Swap shifter cables
• Solid rod ends and spherical bearings (not rubber like OEM cables)
• Billet aluminum bushings
• Stainless steel cables and cable guides
• High heat, wire reinforced sleeve
• This is for a set of 2 cables

Hybrid Racing Push-on Fuel Fitting for Honda Civic Type R EP3 / Integra DC5

• Mounts shifter cables to the front of K-Series trans
• Use for RWD K-Series application
• Must use DC5 style cables & K20 transmission
• Carbon steel construction with durable powder coat finish
• Hardware & spacer included

HYBRID RACING short shifter assy. for Honda Civic Civic 10th Gen (2016-2020) all models.

• Smooth, precise and direct shifts!
• Compact 4-Link Wishbone.
• Anodized Billet Aluminum & One-Piece Steel Frame.
• Customizable Spring Stiffness.
• Internal Spring & One-Piece Cup Design.
• ZERO Console Modification Necessary
• Race tested for durability & reliability.
• 10-50% Adjustable throw and gate spacing.
• Includes 140mm stainless steel shift rod

HYBRID RACING Short Shifter Assembly for Honda Civic Type R FL5 2023+ (LHD)

• Adjustable knob height & position
• Next gen design - more durable & smoother
• Shorten throw up to 50%
• Shorten gate spacing up to 30%

HYBRID RACING short shifter assy. for Honda Civic Type R FN2 / FD2 & Civic Si 06-11.

• Smooth, precise and direct shifts!
• Adjustable Left/Right and Front/Back throw.
• Anodized Billet Aluminum & Steel construction.
• Sealed ball bearings that reduce friction.
• 1.5 Inches of height adjustability.
• Includes 110mm stainless steel shift rod.

HYBRID RACING short shifter assy. for Honda CR-Z (10-16).

• Smooth operation
• 5%-35% reduction in gate spacing
• 20%-45% reduction in front/back movement
• Adjustable knob height +40mm / + 70mm
• Stainless steel bearings
• Rigid powder-coated steel frame
• Includes 140mm stainless steel shift rod.

HYBRID RACING short shifter Assembly for Honda S2000 AP1 AP2.

• Smooth operation
• Up to 25% Shorter throw
• Adjustable knob position (360*)
• PTFE Main Cups
• powder-coated

HYBRID RACING short shifter assy. for Honda Prelude 97-01 / Accord 98 - 02 & Accord CL Type S.

• Smooth operation
• Adjustable knob position 360°
• 5% reduction in gate spacing
• 20%-40% reduction in front/back movement
• Adjustable knob height +10mm / +30mm
• Stainless steel bearings
• Rigid powder-coated steel frame
• Includes 140mm stainless steel shift rod.

HYBRID RACING short shifter assy. for Honda B-Series and D-Series

• Smooth, precise and direct shifts!
• Adjustable Left/Right and Front/Back throw.
• Anodized Billet Aluminum & Steel construction.
• Sealed ball bearings that reduce friction.
• Race tested for durability & reliability.
• 10-40% Adjustable throw and gate spacing.
• Includes 170mm stainless steel shift rod

• Smooth operation
• Internal Spring
• 10-50% Adjustable throw and gate spacing.
• Adjustable knob height

• Available in Black.
• Dress up your engine bay with durable, easy-to-clean silicone hoses.
• Multi-layer fiberglass reinforcement finished with custom HR logos

• Slim design improves hood clearance
• Locks into place when the handle is pushed down
• Fits all K-Series valve covers. Works with both K20 and K24 engines
• Never fight with a stuck dipstick again

Hybrid Racing Stainless Steel Maxim Performances Shift Knob

• One-piece billet Aluminum.
• M10x1.5 thread.
• Brushed finished.
• 461g weight.
• 70mm tall | 46mm wide.

Hybrid Racing Stainless Steel Maxim Performances Shift Knob

• One-piece billet Aluminum.
• M10x1.5 thread.
• Brushed & Blued finished.
• 265g weight.
• 70mm tall | 46mm wide.

• For EP3/DC5 & 06-11 Civic Si
• Simple. Clean. Tucked
• More durable than OEM line
• Black Anodized Fuel Rail
• Black 0-100 PSI Fuel Pressure Guage

• Piston-type design provides pressure damping
• Teflon coated, hard anodized, 6061 aluminum construction
• Stainless steel cap and hardware
• -8 Inlet/Outlet Ports and -6 Return Port
• 1/8 NPT gauge port Includes all fittings needed to attach to -6AN fuel lines
• Includes mounting hardware
• Adjustable from 30PSI - 100PSI

Hybrid Racing USDM T-Shirt.

HYBRID RACING short shifter assy. for Honda Civic Type R EP3, Civic Si 01-05 & Element 03-11.

• Smooth, precise and direct shifts!
• Adjustable Left/Right and Front/Back throw.
• Anodized Billet Aluminum & Steel construction.
• Sealed ball bearings that reduce friction.
• Race tested for durability & reliability.
• 10-50% Adjustable throw and gate spacing.

• Slim design for Increased valve cover to hood clearance.
• Designed to be easier to install and remove.
• Yes, these caps fit all D, B, H, F, J & K covers! :-D (All Honda and Acura chassis Excludes 10th gen Civic in all sub-models)

• Stainless Steel and Aluminum Construction
• Adjustable throw from 75%-40%
• Adjustable knob height and position
• Works with stock & HR shifter cables
• Accepts M10x1.5 shift knobs
• Works with OEM center console
• No major modification or cutting necessary
• Rubber seal and all stainless hardware included
• Works with K20Z3 transmissions